3000W Stereo Power Amplifier

This power amplifier circuit uses a transistor amplifier from the front, signal splitter, driver, and power amplifier. The current consumption required is quite a large power amplifier that is 15-20 A 1500W power amplifier circuits for this. The supply voltage needed by the power of this amplifier is the optimal working order symmetrical 130VDC.

 

3000W Stereo Power Amplifier Circuit

The power amplifier circuit has a power output of up to 1500W RMS power amplifier circuit is often used to power sound systems for outdoor, power amplifier 1500W is equipped to control a DC Offset function to set the power amplifier is turned on at the moment and with no input signal then the output should be 0VDC. They are also equipped with a flow regulator to the power amplifier bias.

In the above series of power amplifiers, 1500W is equipped to control a DC Offset function to set the power amplifier is turned on at the moment and with no input signal then the output should be 0V DC. Then also equipped with a flow regulator to the power amplifier bias. The final part of this power amplifier requires adequate cooling to absorb the heat generated. The power amplifier is not equipped with a speaker protector, therefore it is necessary to diapason protector on the speaker output so that when the power amplifier is not the case turned on the beat to the speaker can damage the speaker.

Gemini GPA-3500 3000W Professional DJ Power Amplifier

 

 

Advantages of high power amplifiers

Strong Bass Boost, not Saggy

Secondary comfortable bias voltage (can be AC (transformer) / DC (adapter))

Highly Efficient Rail – Stack Layout

Oversized Heatsink & Output Coil (not easy saturation)

Pulse Resolution Adjust Enable